Configure the DNS server 209.165.201.14 for each pool.Configure DHCP to provide the default gateway address.Assign the appropriate addresses to each pool.Configure R1 to act as a DHCP server for the VLANs attached to S2.Subinterface names should match the VLAN number. Configure all non-trunk ports on S2 as access ports.Create VLANs on S2 and assign VLANs to appropriate ports.Using the information in the tables above, implement the following requirements: In this culminating activity, you will configure VLANs, trunks, DHCP Server, DHCP relay agents, and configure a router as a DHCP client. VLAN Port Assignments and DHCP Information Ports Verify that PC1 and PC2 can now ping each other and all other devices.8.3.1.2 Packet Tracer вЂ“ Skills Integration Challenge Addressing Table Device IP address Client-ID/ Lease expiration TypeДЎ92.168.30.11 0004.9A97.2535 - Automatic Step 2: Verify configurations. Part 4: Verify DHCP and Connectivity Step 1: Verify DHCP bindings. Use the show ip interface brief command to verify that R2 received an IP address from DHCP.Note: Use Packet TracerвЂ™s Fast Forward Time feature to speed up the process or wait until R2 forms an EIGRP adjacency with the ISP router.Step 1: Configure the Gigabit Ethernet 0/1 interface on R2 to receive IP addressing from DHCP and activate the interface.!R1 R1(config)# interface g0/0 R1(config-if)# ip helper-address 10.1.1.2 !R3 R3(config)# interface g0/0 R3(config-if)# ip helper-address 10.2.2.2 Step 2: Set PC1 and PC2 to receive IP addressing information from DHCP. Part 2: Configure DHCP Relay Step 1: Configure R1 and R3 as a DHCP relay agent. Create a DHCP pool named R3-LAN (case-sensitive).Step 3: Create a DHCP pool on R2 for the R3 LAN. Configure the DHCP pool to include the network address, the default gateway, and the IP address of the DNS server.Create a DHCP pool named R1-LAN (case-sensitive).All other addresses should be available in the DHCP address pool. Part 1: Configure a Router as a DHCP Server Step 1: Configure the excluded IPv4 addresses.Д¬onfigure R2 to exclude the first 10 addresses from the R1 and R3 LANs. You are also required to configure the edge router as a DHCP client so that it receives an IP address from the ISP network. As the network technician for your company, you are tasked with configuring a Cisco router as a DHCP server to provide dynamic allocation of addresses to clients on the network. However, a Cisco router can be configured to provide DHCP services without the need for a dedicated server. Part 4: Verify DHCP and Connectivity ScenarioДЄ dedicated DHCP server is scalable and relatively easy to manage, but can be costly to have one at every location in a network. Part 3: Configure a Router as a DHCP Client Part 1: Configure a Router as a DHCP Server Topology 8.1.3.3 Packet Tracer вЂ“ Configuring DHCPv4 Using Cisco IOS Addressing Table Device Packet Tracer вЂ“ Configuring DHCP Using Cisco IOS (Answer Version)ДЄnswer Note: Red font color or Gray highlights indicate text that appears in the Answer copy only. Version 5.02ДЁ.1.3.3 Packet Tracer вЂ“ Configuring DHCPv4 Using Cisco IOSДЁ.3.1.2 Packet Tracer вЂ“ Skills Integration Challenge After you review all questions, You should practice with our online test system by go to 'Online Test' link below. Each version have 1 to 10 different questions or more. While you take online test with, You may get random questions from all version. We recommend you to go thought all version if you are not clear. What is your version? It depends on your instructor creating your class.

The latest version is version 6.0 in 2018. From year to year, Cisco has updated many versions with difference questions.

8.3.1.2 packet tracer